THE MOON NETWORK

Category: Mikrotik

  • Mikrotik Dual WAN Failover Netwatch | What Is ISP Failover

    Mikrotik Dual WAN Failover Netwatch | What Is ISP Failover

    What is ISP Failover:

    ISP failover is a networking setup that is used to ensure continuous Internet connectivity by employing multiple Internet Service Providers (ISPs). In case of a primary ISP failure due to factors like outages or equipment issues, the system automatically switches to a secondary ISP. This automated process is often triggered by network monitoring tools, which help minimize downtime and ensure uninterrupted access to critical online services. ISP failover is crucial for maintaining business continuity and enhancing network reliability, it offers a seamless transition to an alternate provider in the event of an outage with the primary ISP.

    Current Solution With Netwatch:

    Currently, the Netwatch tool is being broadly utilized to screen the Internet associations of WAN connections by taking a look at a remote host rather than the close-by door. It works habitually by sending an ICMP demand parcel to a host on the internet. Prearranging is meant to weaken or strengthen default routes by examining their feedback when issues arise with remote hosts.

    One might say that such prearranging isn’t difficult to achieve for experts who need to execute network arrangements with failover for their clients yet they don’t think a lot about prearranging. They like to just design using Winbox with GUI

    Remote hosts (i.e. 8.8.8.8 on the ISP1 gateway and 8.8.4.4 on the ISP2 gateway) you can add and always be available for the Netwatch tool’s tasks in Mikrotik.

    Remote hosts (i.e. 8.8.8.8 on the ISP1 gateway and 8.8.4.4 on the ISP2

     

     

     

     

     

     

     

     

    gateway) you can add and always be available for the Netwatch tool’s tasks in Mikrotik.

     

    For ISP 1:

    /ip route enable [find comment=ISP1]

    /ip route disable [find comment=ISP1]

    Courses for remote hosts (for example 8.8.8.8 using the ISP1 passage and 8.8.4.4 through the ISP2 entryway) should be added and consistently accessible for the Netwatch instrument’s errands.

    For ISP 2:

    /ip route enable [find comment=ISP2]

    /ip route disable [find comment=ISP2]

    The default root with the ISP1 remark is crippled when the Netwatch doesn’t get an ICMP reaction parcel for a predefined break (1 second) after sending an ICMP demand parcel through the ISP1 door.

    Go to IP and Click route then enter the following routes.

    Different Remote Hosts with Netwatch:

    It is conceivable that a solitary remote host may be down, actually taking a look at different remote has per WAN connection including Google DNS and Open DNS is needed to affirm regardless of whether the internet association is truly accessible per WAN connection. In such a manner, utilizing the Netwatch device is by all accounts unfit to adapt to because it upholds just a solitary remote host.

     

     

  • Mikrotik WAN Configuration Using Winbox | Access Internet From Vlan

    Mikrotik WAN Configuration Using Winbox | Access Internet From Vlan

    In this article, we will discuss how to access the internet using Vlan.

    Now first of all we need to connect our Mikrotik from pc/laptop using Lan Cable/Patch Cable. Then install Winbox using the following Download button. Then open it now click Neighbors the Winbox will automatically detect your MikroTik click mac address and enter your username. The user name is admin and the password will be blank/empty then click the connect button.

    Now your Mikrotik setting will be open then click interfaces then ethernet Rename interfaces enter a new name Wan1 or as u wish.

    After this, you will go to the vlan tab and create a new vlan by using the plus vlan button. Enter the VLAN name select the VLAN interface as Wan1  and put the vlan id example(1524). Your ISP provider gives u a VLAN id enter your VLAN id and click ok.

    Note: If your ISP provider does not use vlan then skip the vlan setting.

    Now go to IP then address click the + button enter the IP address example: 192.168.10.23/24 select interface (vlan you created) then click the apply button the network option will automatically fill.

    Note Again: If your internet service provider does not provide internet through Vlan then skip it and select interface WAN1 ( Not Vlan ).

    After all please ping your gateway by using the terminal ( ping 192.168.10.12 ) example. If you will receive 0 or 1 ms time your setting will be ok.

    Thanks for visiting our site.

    Thanks for watching.